Roberts Radio R9999 User Manual
Page 23

Specifications
Power Requirements
Mains
AC 230 volts, 50Hz
only
Batteries
4 x LR14 (C size) for radio
2 x LR6 (AA size) for clock/memory
Battery Life
Approx. 40hrs of listening for 4 hours a day at
normal volume using alkaline cells.
Frequency Coverage
FM
87.5-108MHz
MW
522- 1620kHz
LW
144- 281kHz
Circuit Features
Loudspeaker
92mm 4ohms
Output Power
1W into 4ohms
Headphone socket
3.5mm dia
Aerial System FM
Telescopic aerial
MW
Built-in Ferrite aerial
LW
Built-in Ferrite aerial
The Company reserves the right to amend the specification without notice.
Troubleshooting
Due to external interference (caused by static charges from carpets,
thunderstorms, etc.), the control electronics of your radio could receive
bad information. If the display is incomplete or the radio is not responding
to control buttons, proceed as follows:-
Remove the power supply (the mains and all batteries) and re-install
them again after one minute.
This resets the radio to its initial state. The stored data for the individual
memory positions, the clock, the alarm settings and the Last Station
Memory are all cleared.
22
r9999 instruction book.PMD
7/28/2005, 4:07 PM
23