Roberts Radio Gemini 46 RD-46 User Manual

Page 13

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020.8758.0338.(Mon-Fri)

Operating your radio - FM

1. Carefully extend the telescopic aerial.

2. Press the On/Off button to switch on your radio. The display will show

"Roberts" for a few seconds.

3. Press the Band button to select the FM band.

4. Press and release the Select button until the display shows "Auto

tune <>".

5. Press the Tuning Up button your radio will scan in an upwards

direction (low frequency to high frequency) and stop automatically

when it finds a station of sufficient strength.

6. After a few seconds the display will update and show station name.

7. Press the Tuning Down button to scan the FM band in a downwards

direction (high frequency to low frequency).

8. When the waveband end is reached your radio will recommence tuning

from the opposite waveband end.

9. Adjust the Volume and tone control to the required setting.

10. To switch off your radio press the On/Off button.