Roberts Radio Gemini 46 RD-46 User Manual

Page 10

Finding new stations - DAB

As time passes new stations may become available. To find new stations

proceed as follows:-

1. Press and release the

Auto Tune button, the display will show

"Auto tune Quick scan". Your radio will perform a scan of the UK

DAB frequencies. As new stations are found the station counter on

the right-hand side of the display will increase and stations will be

added to the list.

2. To carry out a full scan of the entire DAB Band III frequencies press

and hold down the

Auto Tune button for more than 2 seconds and

then release. The display will show "Auto tune Full scan". As new

stations are found the station counter on the right-hand side of the

display will increase and stations will be added to the list.

Signal strength display - DAB

1. Press and release the Select button until the display will show signal

strength.

2. Position your radio and carefully angle the telescopic aerial for best

reception using the signal strength display as a guide. Move your

radio around and position so as to give maximum number of black

rectangles on signal strength display. The clear unfilled rectangle

indicates minimum signal level required for satisfactory reception.

3. Press the Select button to exit the signal strength display.

1,3