Radio Shack Pro 84 - Manual (Page 44)

Beyond the Basics 44
direct entry search hold mode
To stop searching during direct entry search, press
HOLD. HOLD appears. In this mode, pressing FUNC
+
changes the search direction downward and
pressing FUNC + changes the search direction
upward. or appears depending on the search
direction.
Press FUNC + to decrease the frequency by one
step or FUNC + to increase it by one step. Hold
down or for about 1 second to quickly
decrease or increase the frequency.
To resume direct search, press FUNC + SEARCH or
HOLD. ( or appears on the display, showing the
search direction).
storing direct entry search
frequencies into channel memory
Follow these steps to store frequencies received
during direct entry search (active search and hold).
X Press FUNC + PGM in direct entry search mode
or direct entry search hold mode. The frequency
and lowest blank channel alternate on the display.
Y To select another channel, press FUNC + or
. To enter the frequency, press FUNC. F