Radio Shack Pro 84 - Manual (Page 33)

33 Beyond the Basics
setting the signal stalker options
X Press FUNC then press and hold for 2
seconds. One of the following signal stalker
options appears.
S-S.bnd: Lets you select the signal stalker band.
S-S.ALt: Lets you select the signal stalker alert
settings.
Y Repeatedly press or to select the option
you want, then press E.
If you selected S-S.bnd, one of the following
band names appears.
bnd Lo: VHF Low Band (25.0000 - 54.0000 MHz)
bnd Air: AIR Band (108.0000 - 136.9875 MHz)
bnd Hi: VHF High Band (137.0000 - 174.0000
MHz)
bnd UHF: UHF Band (406.0000 - 512.0000 MHz)
bnd 800: 800MHz Band (806.0000 - 956.0000 MHz)
If you selected S-S.Alt, skip to Step
[
.
Z Repeatedly press or until the band you
want to search appears, then press E. Otherwise,
press ./CLR if you do not want to select it.
The scanner displays the following options.