Radio Shack MPA-125 - Manual (Page 4)

4 Preparation
ˆ
Preparation
PRESETTING THE CONTROLS
Before you begin making connections or using your amplifier, preset the audio input source’s
and the amplifier’s controls to avoid over-driving a channel or producing sudden unexpected
loud sounds.
Presetting Audio Input Devices
Set the audio input sources’ controls to these levels:
Presetting the Amplifier
Warning: To prevent possible hearing loss, set the amplifier’s controls to the settings shown
below. After you turn on the amplifier or change the program source, adjust the controls to a
comfortable listening level.
Set the amplifier’s controls to these levels:
Audio Device Control Setting
Turntable Power Off
Tape Deck Power Off
CD Player Power Off
Amplifier/Receiver Power Tone Off Flat
Control Setting
POWER Out
MIC 1, MIC 2, MIC 3, MIC 4/PHONO, CD AUX MIN
MASTER VOLUME MIN
POWER MIC 1 MIC 2 MIC 3 MIC 4/PHONO CD/AUX MASTER VOLUME
32-2003.fm Page 4 Tuesday, March 28, 2000 10:45 AM