RCA L37WD12 - Manual (Page 30)

Using the TV's Menu System
30 Chapter 3
The following Picture menu options are only available for VGA input.
Auto adjustment Adjusts the position of the picture automatically.
Phase Adjusts the picture if there is fl icker of screen letters, color
misalignment, or blurring.
Clock Adjusts the clock sync of the picture.
Vertical position Adjusts the picture's position upward or
downward.
Horizontal position Adjusts the picture's position left or right.
Setup Menu
The Setup menu lets you confi gure the TV to fi t its surroundings and
your preferences. To access the Setup menu, press MENU on the
remote, and then select Setup from the Main Menu.
Channel setup
Signal source If you connected a signal to the ANTENNA/
CABLE ANALOG INPUT only, select Analog. If you connected
a signal to the ANTENNA/CABLE DIGITAL INPUT only, select
Digital. If you connected a signal to both inputs, select Both.
Analog signal type (available for the analog tuner only) The
analog signal type was set during the initial setup. If you change
how you receive broadcasts through the ANTENNA/CABLE
ANALOG INPUT, you must change the Signal type setting. Choose
Cable if you are using cable or a cable box for TV signals. Choose
Antenna if you are using an off-air antenna for analog TV signals.
Dig. signal type (available for the digital tuner only) The digital
signal type was set during the initial setup. If you change how you
receive broadcasts through the ANTENNA/CABLE DIGITAL INPUT,
you must change the Signal type setting. Choose Cable if you are
using cable or a cable box for TV signals. Choose Antenna if you
are using an off-air antenna for digital TV signals.
Auto Ch. search Searches for channels the signal is receiving.
Go to page 14 for more information.
Auto Ch. update Searches for any new channels that are not in
your channel list and adds them to the list.
List and Labels Edit the channels in the list or choose labels for
each channel.
Channel number Use the number buttons on your remote to
enter the channel number.
In channel list If you've entered a channel you want to add to
the channel list, highlight In channel list and press the right arrow
to place a check in the check box. If you've entered a channel
you want to delete from the channel list, press the right arrow
button to uncheck the box.
Go back
Black level
Color
Contrast
Color warmth Warm...
Auto adjustment ....
Phase
Clock
Vertical position
Horizontal position
Picture
Setup
Go back
Channel setup ...
List and Labels ...
Autotuning ...
Closed caption
...
Preferences ...
Message ...
List and Labels
Go back
Channel number
010
In channel list
Channel label _ _ _ _ _ _
Favorite channel
List and Labels continued on next page...
VGA Picture menu
1670729A.indb 30 1670729A.indb 30 6/2/06 4:21:14 PM 6/2/06 4:21:14 PM