Radio Shack CID-932 - Manual (Page 14)

14
Cautions:
You must use a Class 2 power source that sup-
plies 9V DC and delivers at least 300 mA. Its cen-
ter tip must be set to positive and its plug must fit
the CID-932's DC9V jack. The supplied adapter meets
these specifications. Using an adapter that does not meet
these specifications could damage the CID-932 or the
adapter.
• Always connect the AC adapter to the CID-932 before you
connect it to AC power. When you finish, disconnect the
adapter from AC power before you disconnect it from the
CID-932.
3. Insert the supplied AC adapter’s barrel plug into the DC9V
jack on the bottom of the CID-932. Plug the AC adapter
into a nearby outlet that does not operate with a light
switch.
Note: AC power is required in order for the CID-932’s voice
feature to function. Be sure to connect AC power.
!
43-932.fm Page 14 Wednesday, January 12, 2000 9:56 AM