Rep lacing the battery, Warning, Caution – Rackmount Solutions Enterprise Series User Manual
Page 13
12
R
EPLACING
T
HE
B
ATTERY
The Enterprise Series UPS has an easy to replace hot-swappable battery(s).
Please read the following warning statements before attempting to service the
battery(s). NOTE: If there is a power interruption while replacing the hot-swappable
batteries, with the UPS on, the load will not be backed up.
WARNING!
THIS UNINTERRUPTIBLE POWER SOURCE CONTAINS POTENTIALLY
HAZARDOUS VOLTAGES. DO NOT ATTEMPT TO DISASSEMBLE THE UNIT
BEYOND BATTERY REPLACEMENT PROCEDURES BELOW. EXCEPT FOR THE
BATTERY, THIS UPS CONTAINS NO USER SERVICABLE PARTS. REPAIRS CAN
BE PERFORMED BY MINUTEMAN SERVICE PERSONNEL ONLY
DO NOT OPEN OR MUTILATE BATTERIES. RELEASED ELECTROLYTE IS
HARMFUL TO THE SKIN AND EYES AND MAY BE TOXIC
CAUTION:
CAUTION:
CAUTION:
DO NOT DISPOSE OF BATTERIES IN A FIRE. THE BATTERIES MAY EXPLODE.
THE BATTERIES IN THIS UPS ARE RECYCLABLE. DISPOSE OF THE BATTERIES
PROPERLY. THE BATTERIES CONTAIN LEAD AND POSE A HAZARD TO THE
ENVIRONMENT AND HUMAN HEALTH IF NOT DISPOSED OF PROPERLY. REFER
TO LOCAL CODES FOR PROPER DISPOSAL REQUIREMENTS OR RETURN THE
BATTERY TO MINUTEMAN.
ALTHOUGH BATTERY SYSTEM VOLTAGES ARE ONLY 24 VDC AND 48
VDC. THE BATTERY SYSTEM CAN STILL PRESENT A RISK OF ELECTRI-
CAL SHOCK. THE CURRENT CAPABILITY OF A BATTERY IS SUFFICENT TO
BURN WIRE OR TOOLS VERY RAPIDLY, PRODUCING MOLTEN METAL.
OBSERVE THESE PRECAUTIONS WHEN REPLACING THE BATTERIES:
1. REMOVE WATCHES, RINGS, OR OTHER METAL OBJECTS
2. USE HAND TOOLS WITH INSULATED HANDLES
3. DO NOT LAY TOOLS OR OTHER METAL PARTS ON TOP OF BATTERIES
REPLACE BATTERIES WITH THE SAME NUMBER AND TYPE AS ORIGI-
NALLY INSTALLED IN THE UPS. THESE BATTERIES HAVE PRESSURE
OPERATED VENTS.
CAUTION:
Enterprise
Model #
E500 & 500i
E750 & 750i
E1100 & 1100i
E1500 & 1500i
E2300 & 2300i
E3200 & 3200i
Battery
Model #
12V4.5Ah
12V7.2Ah
12V4.5Ah
12V7.2Ah
12V12Ah
12V12Ah
English
REP
LACING THE BATTERY
$