Radio Shack PRO-70 - Manual (Page 27)

27
Using Direct Search
During a direct search, the scanner searches upward or
downward, starting from a frequency you specify. Follow
these steps to use direct search.
1. Press MANUAL or PGM , then enter the frequency you
want to use as a starting point for the search.
Note: To start from a frequency already stored in one
of your scanner’s channels, press
MANUAL or PGM ,
enter the desired channel number, then press MAN-
UAL or PGM again.
2. Press and hold or for about 1 second to search
upward or downward. –d , SRCH , and or appear
on the display.
3. When the scanner stops on an active frequency, you
can either:
• Press 0/MON to store it in the monitor memory.
• Press and hold or to continue the search.
20-310.fm Page 27 Wednesday, August 4, 1999 10:49 AM