Radio Shack CID-947 - Manual (Page 13)

13 Preparation
Connecting to an Answering Machine
1. Disconnect the phone line cord that connects your answer-
ing machine to the phone line from the answering
machine’s jack. Then plug it into the module’s
TO LINE jack.
2. Plug one end of the supplied line cord into the module’s TO
PHONE jack.
3. Plug the cord’s other end into the answering machine’s
jack.
4. Set your answering machine to answer after two or more
rings. This gives the module time to record the call informa-
tion that the phone company sends between the first and
second rings.
MOUNTING THE MODULE
You can place the module directly on a desk, shelf, or table by
itself or using the stand on the supplied mounting bracket. Or,
you can use the bracket to mount the module on a wall.
To Phone
TO LINE TO PHONE
43-947.fm Page 13 Thursday, May 25, 2000 11:36 AM