Radio Shack CID-947 - Manual (Page 11)

11 Preparation
CONNECTING THE MODULE
Your module connects to any modular phone jack and your
phone. You can also connect it to an answering machine.
Note: The module might not work with older phones, such as
Western Electric phones.
Connecting to a Single-Line Phone
1. Disconnect the telephone line cord from the phone and
plug it into the module’s TO LINE jack.
2. Plug one end of the supplied line cord into the module’s TO
PHONE jack.
3. Plug the other end of the cord into the phone’s jack.
Connecting to a Two-Line Phone
To record information about calls received on a two-line phone,
you can connect two CID-947 modules using a triplex adapter.
Each module only records information about calls received on
the line to which it is connected.
9V DC 200mA
TO LINE
TO PHONE
43-947.fm Page 11 Thursday, May 25, 2000 11:36 AM