Radio Shack PDCD810 - Manual (Page 4)

- 3 -
DESCRIPTION OF THE FUNCTIONS
Function of the Main Unit :
1.POWER(Power Switch)
Press the power switch to turn the unit on. To switch the
POWER off press the POWER switch again.
2.Disc Loader
The disc is placed on the loader and the CD disc will be
loaded automatically. Pressing the Eject button to eject the
CD Disc tray.
3.Eject Button
Press to load or eject the disc
4.DISC illuminator
To illuminate for disc.
5.AC INPUT
Connecting this power cord into an AC wall outlet with the
proper AC voltage.
6.LINE OUT (Output Jacks)
The audio from each CD player is output from these jacks.
7.CONNECTOR PORTS
The 8-pin termination permits the connection of the main
unit to the control unit.
8.DIGITAL OUT
The digital from each CD player is output from these
jacks. Connect to the line input of the D/A Amplifier.
9.START/PAUSE
This connector is used for fader start; connect it to a
mixer and remote control the “START/PAUSE” by moving
the fader of mixer.
10.TACT-LOCK option
Select the type of switch in the mixer for FADERSTART
wire remote control.
Connect to the line input of the mixer.
810
230V 50Hz 115 V 60 Hz