Mounting on a wall plate – Radio Shack TAD-1006 User Manual

Page 10

Mounting on a Wall Plate

1. Plug one end of the supplied mod-

ular cord into the

TO LINE

jack on

the back of the TAD-1006.

2. As shown below, press the modu-

lar cord into the right groove on
the mounting bracket and press
the AC adapter’s cord into the left
groove.

3. Plug the other end of the modular

cord into the modular wall plate.

4. Line up the keyhole slots on the

bracket with the studs on the wall
plate, then slide the TAD-1006
down onto the wall plate until it is
secure.

5. Press up on the handset holder to

remove it, turn it over so its tabbed
edge faces up, then press it back
down into its slot on the base.

illustration

43-768.fm Page 10 Friday, August 13, 1999 2:49 PM