Radio Shack TAD-1027 - Manual (Page 7)

7
When you first connect power, the PLAY/
SKIP indicator flashes rapidly (until you
record the outgoing message), the AN-
SWER indicator flashes (until you install
a backup battery), and the TAD-1027 au-
tomatically runs a self-test. You cannot
operate the TAD during this test. When
the test is complete, the TAD-1027
beeps once and announces, “Answer
off.”
When the battery is weak or not installed,
the ANSWER indicator flashes and
pauses, flashes and pauses, until you in-
stall a fresh battery. Be sure the AC
adapter’s cord is plugged in so you do
not lose the TAD-1027’s stored informa-
tion, then replace the battery.
Caution: Dispose of old batteries
promptly and properly.
Illus. of ANSWER and
PLAY/SKIP indicators.
43-787.fm Page 7 Monday, August 16, 1999 8:11 AM