Radio Shack PRO-83 - Manual (Page 57)

57 Beyond the Basics
or fully charged (if you installed rechargeable
batteries. Also make sure the AC adapter’s or DC
adapter’s barrel plug is fully inserted into the
scanner’s 6V 300 mA jack. See “Using AC Power” on
Page 10 for more information.
If the batteries are OK, the antenna might not be
connected or is connected incorrectly. See “Con-
necting the Antenna” on Page 13 for more information.
Q: My scanner is not receiving weather channels.
How do I set it so I can receive weather channels?
A: The scanner might be set to weather alert mode.
If this happens, it cannot receive weather channels
until it receives a weather alert. To hear a weather
channel at any time, make sure weather alert is
turned off. See “WX Alert” on Page 38 for more
information.
Q: Error appears on the display. What does it mean?
A: If you were trying to enter a frequency, you might
have made a programming error. Re-enter the
frequency correctly, including the decimal point.
See “Storing Known Frequencies Into Channels” on
Page 25 for more information.