Rangemaster 110 DUAL FUEL U109600-02 User Manual
Page 28
28
You will need the following equipment to complete
the cooker installation satisfactorily
STABILITY BRACKET
If the cooker is to be supplied
with gas through a flexible hose,
a stability bracket or chain must
be fitted.
These are not supplied by with the cooker but
are available at most builders’ merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit
(only required if fitting the cooker on a stone or
concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or
concrete floor)
4. Screws for fitting stability bracket
5. Pencil
6. Steel tape measure
7. Cross head screwdriver
8. Flat head screwdriver
9. 4mm & 3mm Allen keys
10. Spirit level
11. Adjustable spanner
Checking the parts
4 pan supports
Griddle plate
Grill pan and trivet
Levelling tool
Handyrack
Meat tin
ArtNo.324-0011 Flat & drop shelves
2 flat oven shelves and 2 drop
shelves.
Splashback & Plinth
Conversion kit from Natural
gas to LP gas
Hand rail and door handles