Radio Shack AM/FM Stereo Auto Reverse Cassette Recorder - Manual (Page 11)

11
Recording from the Radio
1. Load a blank cassette tape or
one you want to record over into
the cassette compartment.
2. Set TAPE/RADIO to RADIO.
3. Set BAND to the desired band.
4. Adjust TUNING to the station
you want to record.
5. Press RECORD to begin record-
ing. PLAY, RECORD, and
MODE lock down.
Note: To temporarily stop
recording, press PAUSE. To
resume recording, press PAUSE
again.
6. Press STOP/EJECT to stop
recording.
Making Live Recordings
Follow these steps to make live re-
cordings using the built-in micro-
phone.
1. Load a blank cassette tape or
one you want to record over into
the cassette compartment.
2. Set TAPE/RADIO to TAPE.
3. Place the SCR-99 1-2 feet from
the recording source.
4. Press RECORD to begin record-
ing. PLAY, RECORD, and
MODE lock down.
Note: To temporarily stop
recording, press PAUSE. To
resume recording, press PAUSE
again.
5. Press STOP/EJECT to stop
recording.
TAPE TIPS
Recommended Tapes
Tape quality greatly affects the qual-
ity of the recording. We recommend
extended-range or low noise type 1
regular length (60-minute or 90-
minute) normal-bias cassette tapes.
We do not recommend long-play
cassette tapes such as C-120s be-
cause they are thin and easily tangle.
Recording Over or Erasing a
Cassette Tape
To record over a cassette tape, sim-
ply record as usual. The cassette
deck records over the previous re-
cording.
You can quickly erase both sides of a
cassette tape using a bulk tape eras-
er such as Cat. No. 44-232, available
at your local Radio Shack store.
14-729.fm Page 11 Wednesday, June 30, 1999 5:27 PM