RCA 1543007A - Manual (Page 26)

24
Recording a Program
Express Recording
Express recording lets you record up to four hours or to the end of the tape without programming
the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end
of the recording.
SKIP
SPEED
OFF
REW
PLAY
FF
REC
STOP
PAUSE
DISPLAY
SLEEP
MUTE
PREV
1
2
3
4
5
6
7
8
9
0
TRACK
F.ADV
CLEAR
MENU
RESET
-
TV
VCR
+
CHAN
V
O
L
CHAN
V
O
L
S
E A
R C H
How to Use Express Recording
1 . Insert a tape with safety tab in place.
The TV/VCR will turn on.
2 . Select the channel to be recorded.
To record from the AUDIO/VIDEO IN jacks, press
INPUT.
Two selections appear in the channel field. Press
1 to select VIDEO 1, the rear AUDIO/VIDEO IN jacks.
Press 2 to select the front panel AUDIO/VIDEO IN jacks.
3 . Press SPEED to select a recording speed.
You can also change the speed of the recording
in progress.
4 . Press REC twice to activate express recording.
5 . Press REC repeatedly until the desired amount of
recording time is displayed.
Each time you press REC, the recording time increases
as shown below:
The TIMER REC indicator on the TV/VCR’s front panel
will light during express recording.
During express recording, press REC to display the time
remaining on the screen. Press REC again to increase the
recording time.
Important: This feature is not available in any DC mode.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on
the remote to stop the express recording.
— OR —
Repeatedly press REC until RECORD LENGTH: 0:00
appears. The recording stops after a few seconds.
Display
Press Recording
REC Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00:00 (Normal Record)
0:00 (Turns Off)
RECORD LENGTH 0:00
Ch 04
Press REC to set length