RIDGID SR-60 - Manual (Page 42)

40 www.seektech.com
Ridge Tool Company Elyria, Ohio U.S.A
SeekTech SR-60
line. If further assistance is needed, please call
RIDGE Tool Technical Service at 800-519-3456. If
appropriate: replacements can be ordered from your
Ridgid dealer.
Maintenance and Cleaning
1. Keep the SR-60 clean with a damp cloth and
some mild detergent. Do not immerse in water.
2. When cleaning, do not use scraping tools or
abrasives as they may permanently scratch
the display. NEVER USE SOLVENTS to clean
any part of the system. Harsh chemicals can
cause cracking of the Case.
Locating Faulty Components
For troubleshooting suggestions, please refer to the
trouble-shooting guide on page 42. If necessary,
contact RIDGE Tool Technical Service at 800-519-
3456. We will establish a plan of action to get your
SR-60 working for you.
Service and Repair
Important
Instrument should be taken to a RIDGID
Independent Authorized Service Center or
returned to the factory. Remove batteries before
shipping.
All repairs made by Ridge service facilities are
warranted against defects in material and
workmanship
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail:
[email protected]
For the name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool
Company at (800) 519-3456 or
www.ridgid.com .
CAUTION
Remove batteries entirely before
shipping.