beautypg.com

Manual tuning - dab, Signal strength display - dab – Roberts Radio CRD-36 User Manual

Page 12

background image

11

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III

channels. UK DAB stations are located in the range 11B to 12D.
1. Press and release the Menu button until the display shows "Station

order".

2. Press the Skip Up or Down buttons until "Manual tune" appears on

the display. Press and release the Select button.

3. Press the Skip Up or Down buttons to select the required DAB

channel.

4. Press and release the Select button the open bar in the middle shows

you the minimum signal strength needed for good DAB reception. The

signal bars will go up and down showing the changing signal strength

as you adjust the wire aerial or your clock radio position.

5. Press and release the Select button to return to normal tuning

mode.

Signal strength display - DAB

1. Press and release the Select button the lower line of the display

shows signal strength. Position your radio and angle the telescopic

aerial for best reception using the signal strength display as a guide.

Move your radio around and position so as to give maximum number

of black rectangles on signal strength display.

2. The clear unfilled rectangle indicates minimum signal level required for

satisfactory reception. Press and release the Select button to return

to normal tuning mode.

1,2

2,3

2,3

1

2,4,5