Rosewill RNX-N100 - Manual (Page 7)

Quick Installation Guide
Wireless Adapter RNX-N100
7
5.
Carefully insert the USB adapter into the USB port. MAC OS X will then detect and
install the new hardware.
6.
The Rosewill Client Utility is installed in the Applications folder.
USB Adapter Adding a Profile – MAC OS 10.3 10.4 10.5
The Profile tab is used to store the settings of multiple Access Points such as home, office, café,
etc. When adding a profile you are required to enter a profile name and SSID as well as
configure the power-saving mode, network type, RTS/fragmentation threshold and
encryption/authentication settings.
1. Profile: Enter a name for the profile; this does not need to be the same as the
SSID.
2. SSID: Enter the SSID of the network or select one from the drop-down list. The
SSID is a unique name shared among all points in your wireless network. The
SSID must be identical for all points in the network, and is case-sensitive.
3. PSM: Select a power saving mode (PSM) option.
CAM (Continuously Awake Mode): Select this option if your notebook is
always connected to the power supply.
PSM (Power Saving Mode): Select this option if your notebook uses its
battery power. This option minimizes the battery usage while the network is
idle.