Rosewill RNX-N100 - Manual (Page 2)

Quick Installation Guide
Wireless Adapter RNX-N100
2
The high-speed wireless USB 2.0 client adapter is the most convenient way to let you put a
desktop/notebook computer almost anywhere without the hassle of running network cables.
Now you don’t need to suffer from drilling holes and exposed cables. Once you are connected,
you can do anything, just like the wired network. This USB client adapter operates seamlessly
in 2.4GHz frequency spectrum supporting the 802.11b, 802.11g, and 802.11nwireless
standards. It’s the best way to add wireless capability to your existing wired network or simply
surf the web.
For advanced configuration, refer to the User’s Manual in the CD-ROM provided.
USB Adapter Description
USB Connector
The USB adapter is a standard USB
adapter that fits into any USB interface.
The USB adapter has two LED indicators
and a built-in antenna.
PWR and LINK
LED Indicator
USB Adapter for Windows 2000/XP/Vista– Installation
During the installation, Vista may need to copy systems files from its installation CD. Therefore,
you may need a copy of the Windows installation CD at hand before installing the drivers.
Follow the steps below in order to install the USB adapter drivers:
1. Insert the CD-ROM that was provided to you in this package. The setup should run
automatically. If the setup does not run automatically, then you must manually select the
setup.exe file from the CD-ROM drive.
2.
Once the setup begins you will see the InstallShield Wizard. Select Rosewill
Configuration Tool and then click on the Next> button.