RCA RT2250 - Manual (Page 18)

Operating your Receiver
Example 3:
LD: You may need to select a different Audio
Channel on your LD (refer to your LD player manu-
al)
8. Adjust volume knob accordingly
Operating the Radio
The receiver has a built-in tuner that allows for
AM/FM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press STANDBY/ON to switch on the receiver.
3. Press AM/FM and "TUNER" will flash on the
display.
4- To select band, press the AM/FM button again to
toggle between AM/FM mode.
When an FM station broadcast Stereo sound, STEREO
is displayed.
5- Tune the stations by pressing TUNING UP or
DOWN repeatedly until the desired station is found.
Alternatively, you can press and hold TUNING UP or
DOWN for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
7. Repeat steps 5 or 6 to tune another radio station.
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details)
6 CH.IN
FUNCTION
CH.IN
FUNCTION
STANDBY/ON
TV ON OFF VCR 1
VCR 2 DVD•6 CH
CH +
TAPE CD
SAT•CABLE AM•FM
6 CH.IN
HOME THEATER AV SURROUND RECEIVER RT2280
lifier
TV ON OFF VCR 1
VCR 2 DVD•6 CH
T
SAT•CABLE AM•FM
CH +
APE CD
6 CH
HOME THEATER AV SURROUND RECEIVER RT2280
iscrete Amplifier
STOP PAUSE
LEVEL AUDIO
RECORD
SURR DIGITAL
PLAY FORWARD REVERSE
7 8 9
0
INPUT•SEEK ANT•FMS
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away of them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
16