Runco DIGITAL LIGHT PROCESSING VX-2000D - Manual (Page 66)

Operation
54 Runco VX-2000d Owner’s Operating Manual
PRE
L
IMINAR
Y
Main Menu Press MENU on either the remote control or built-in keypad (on the projector rear panel)
to display the Main Menu. The Main Menu is the starting point for calibrating the VX-2000d
to optimize the display of digital 1080i and 1080p sources.
To use the on-screen menus:
1. Press or to select a sub-menu, then press ENTER or .
2. Press or to select a sub-menu item.
3. For items that present a list of choices, such as Picture Memory:
a Press ENTER or .
b Press or to select a value from the list.
c Press ENTER again to confirm your selection.
d Press or RETURN to return to the menu.
– OR –
For items that are represented by numeric values, such as Contrast:
a Press ENTER to hide the “parent” menu and display only the slidebar for that item.
b Press or to adjust the value.
c Press or to select another item to adjust. Or, press ENTER or RETURN to
return to the menu.
4. Press MENU to hide the OSD menus.
➤
Picture Adj.
White Balance
Information
Options
Language
Runco Video
Overscan + - 5