Radio Shack TAD-1018 - Manual (Page 13)

13
Note: If you do not have any special
telephone services, pressing
FLASH
might disconnect your current call.
SETTING THE PHONE’S
VOLUME
Slide VOL (volume) on the handset to
set the handset’s volume to the de-
sired level.
USING TONE SERVICES
WITH A PULSE LINE
Some special services, such as alter-
nate long-distance and bank-by-
phone, require tone signals. If you
have pulse service, you can still use
special services by following these
steps.
1. With TONE/PULSE set to PULSE ,
call the special service.
2. When the service answers, press
TONE . Any additional numbers
you dial are sent as tone signals.
3. When you complete the call, hang
up the phone. The phone auto-
matically changes back to the
pulse mode.