Radio Shack SYSTEM 440 - Manual (Page 14)

14
CONNECTING TO AN ANSWERING MACHINE
1. Disconnect the line
cord that connects
your answering
machine to your
phone from the
answering machine’s
jack. Then plug the
cord into the module’s
PHONE jack.
2. Plug one end of the supplied line cord into the module’s WALL jack.
3. Plug the cord’s other end into the answering machine’s jack.
4. Set your answering machine to answer after 2 or more rings.
Some answering ma-
chines block Caller ID in-
formation from the
module. If you have prob-
lems receiving Caller ID
information, try setting up
your equipment this way:
Supplied
Line Cord
PHONE
WALL
Supplied
Line Cord
PHONE WALL
43-974.fm Page 14 Monday, August 16, 1999 4:27 PM