Radio Shack 15-1915B - Manual (Page 31)

Need help? Call 1-800-950-7557
31
IF YOU HAVE PROBLEMS
SCANNING THE CODES
If the Pocket Remote does not control your re-
mote-controlled devices when you first set it up,
you probably haven’t entered the correct 4-digit
codes for your devices.
You can try all the codes for the brand of your de-
vice, or you can follow these steps to search the
Pocket Remote’s entire library.
1. Manually turn on the device you are trying to
set up.
2. Aim the Pocket Remote at the device.
3. Press the device key, then hold down P until
the red light blinks twice. Then press the
CHAN t key three times. The red light blinks
twice again.
4. Repeatedly press PWR then the device key
for the type of device ( TV , VCR , or CBL ) until
the device responds.
Each time you press the device key, the
Pocket Remote advances to the next manu-
facturer’s code in the list.
5. When the device responds, press P to lock in
the manufacturer’s code. If necessary,
repeat these steps for each device key.
CHECKING THE CURRENT
CODES
To determine which 4-digit code the Pocket Re-
mote is set to for a particular device:
1. Press the appropriate device key, then hold
down P until the red light blinks twice.
2. Press the key equivalents to enter 4 4 3 . The
red light blinks twice again.
15-1915b.fm Page 31 Monday, July 19, 1999 12:06 PM