Radio Shack PRO-2050 - Manual (Page 32)

32
Storing IDs into Scan Lists
While Searching
Follow these steps to select a scan list
location and store an ID during a
search.
1. When your scanner stops on an
ID you want to store, press PRI-
ORITY . The currently selected
scan list memory location flashes.
2. Press E to store the ID in the
selected scan list memory loca-
tion. Or, repeatedly press s or t to
select the scan list memory loca-
tion you want, then press
E .
3. Press SEARCH to resume search-
ing.
Automatically Storing an ID in
a Scan List Location
To display a scan list location and
store an ID in that location during a
search, press
PRIORITY to display the
current scan list location, then press E
when your scanner stops on an ID you
want to store.
To store an ID in the first available
scan list location during a search,
press
E at any time.
Deleting a Stored ID
1. Press MANUAL .
2. Repeatedly press s or t to select
the scan list location (shown at the
top of the display) you want to
delete.
3. Press 0 then E .
SCANNING THE SCAN
LISTS
Press SCAN to begin scanning the
lists you have programmed. SCAN
scrolls on the display.
Note: If you haven’t programmed any
IDs,
SCAN scrolls on the display but
your scanner does not stop on an ac-
tive conversation.
Scan List Location
20-430.fm Page 32 Wednesday, August 4, 1999 1:29 PM