RCA RS2655 - Manual (Page 6)

EN EN
9
1. Press SOURCE repeatedly to select TAPE.
2. Press to open the cassette door.
3. Insert a tape into the door and push the door
closed.
4. Press to position the tape to the
desired starting position.
5. Press to begin playback.
8
CD Player CD Player
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is
stopped, press
PROG•SET to enter
program mode. The
system displays the next available program num-
ber: “- - P:01,” with “- -” flashing, prompts you
for the first track in the program list.
2. Press SKIP BACKWARD / SKIP FORWARD
to select a track (press DISC SKIP to select a
track from a different disc).
3. Immediately press PROG•SET to assign the select-
ed track to the program number. After 3 sec-
onds, you are prompted for the next track in
the program list. (In CD program mode, PROG
icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. While the CD player is stopped, press PROG•SET
to enter PROGRAM mode.
2. Press PROG•SET repeatedly to list each track
assignment in the program list.
Deleting Program List
While in PROGRAM mode, press and hold STOP for 3
seconds. They system displays the message CLEAR.
5 P:01
Tips:
• You can create a program of up to
32 tracks.
• Press CD INFO repeatedly to view
elapsed track time, track number, track
remain time and disc remain time.
Tape Player
Note:
Only the first 199 tracks from each disc
can be programmed.
mp3/WMA Playback Sequence
• Refer to the diagram below for playback sequence details on multi-level folder structure.
• Songs are played before playing songs placed in folders at each level.
Folder 1
Folder 3
Song 1.1.1
Song 1.1.2
Song 1.1.3
Song 2.2
Song 2.3
Song 2.4
Song 1.2.1.1
Song 1.2.1.2
Song 1.2.1.3 Folder 1.2.1
Song 2.1.1
Song 2.1.2 Folder 2.1
Song 3.1
Song 3.2
Folder 1.1
Folder 1.2
Folder 2
A
E
G
B
C
F
D
3
4
5
6
7
8
9
10
11
12
13
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4
Song 4
Song 5 1
2
14
15
Note:
• Folder playback sequence is indicated by the letters A to G.
• Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.
Note:
• The first 99 tracks of each disc will be
shuffled and played once before any of
them is repeated.
• You may also press REPEAT to select 1
disc or all discs before activating INTRO
& SHUFFLE functions.
• In stop mode for mp3 and WMA CDs,
press STOP to return to the first track
of the current disc. The total number of
tracks on the current disc is displayed
(TT).
RS2653_55_EN(TCEC) 1/13/06 1:27 PM Page 12