Troubleshooting guide – RCA BRC3108 User Manual
Page 23
19
SYMPTOM
CAUSE (AND REMEDY)
• Ensure the power adapter is connected.
• Make sure that the unit is turned on.
• The product is in STANDBY mode - turn switch to OFF (middle) position, then
back to ON position.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the battery in the remote with new one.
• Make sure plastic sheet has been removed from battery section.
• The volume control is located on the side of the unit - please try adjusting
this.
• Make sure that you select ON mode.
• Make sure the unit is not paused. Press the PLAY button.
• Make sure the unit is not in fast-forward or fast-reverse mode. Press the
PLAY button.
• Make sure the AUDIO/VIDEO input/output connections are correct.
• The unit has overheated. Shut it off for 30 minutes to allow it to cool down.
• The region number of the disc doesn't match the region number of this unit.
• The disc is dirty. Gently clean the disc.
• The disc is scratched.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
alcohol.
• Clean the disc.
• Make sure that the disc has the correct region code.
• There is no disc inside the unit ("No Disc" appears on the screen).
• Insert the disc correctly with the graphics facing up.
• Clean the disc.
• A non-NTSC disc has been inserted, or the disc region number does not match
the region number of the unit.
• Condensation may have formed inside the unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
• Make sure that disc supports PiP mode.
No power
Power switch is in
ON position, but the
product isn't ON.
The remote control
does not function.
Very little or no sound
is coming from a DVD.
No picture.
The picture is not
clear.
Loud hum or noise is
heard.
Blu-ray Disc or DVD
does not play.
Picture-in-Picture (PiP)
does not work on a
Blu-ray Disc
Specifications and external appearance are subject to change without notice.
Troubleshooting Guide