RCA BRC3108 - Manual (Page 15)

11
Playing a Blu-ray Disc or DVD
1. Slide the CHARGE/OFF/ON switch to the ON position.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.
2. Push to open the disc door.
3. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you
hear a “click”.
4. Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading,
for most discs, the unit will automatically take you to the main menu or start playing. If the unit does not
automatically start playing the disc, press the PLAY button.
Pausing Playback (Still Mode)
Press the (PAUSE) STEP button to pause. To resume normal playback, press the PLAY button. Each time
you press the (PAUSE) STEP button, the picture advances one frame on disc .
Stopping Playback
To stop playback, press the STOP button. To resume playback, press the PLAY button. Depending on the
disc, playback starts where it stopped or at the beginning of the disc.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will
reset the disc to the beginning.
Skipping to a Different Track
• Press the SKIP button to go back to previous titles/chapters/tracks.
• Press the SKIP button to advance titles/chapters/tracks.
• For an audio CD, use the number buttons on the remote control to go directly to the desired track
number.
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in serveral levels.
• While an image is zoomed, you can use the , , or CURSOR button to shift the view and display the
part you want.
• To return to normal view, press the ZOOM button repeatedly until "OFF" shows. The screen will return to
normal.
• When you reach the edge of the image, the display will not shift anymore in the direction.
Fast Forward / Fast Reverse
1. Press the or button when a disc is playing.
• The disc begins a fast scan at two times normal (x2) speed.
• Each time the or button is pressed, the speed of the fast scan changes.
2. Press the PLAY button when you have reached the desired point to resume playback at normal speed.
This owner’s manual explains the basic instructions
for operating this unit. Some discs are produced in
a manner that allows specific or limited operation
during playback. Therefore, this unit may not
respond to all operating commands. THIS IS
NOT A DEFECT. Please refer to the instructions
accompanying the specific disc in question for more information about the options available on
that disc.
“
” may appear on the screen during operation.
A “ ” means that the desired operation is not
permitted by the unit or disc.
Playing a Blu-ray Disc or DVD