Radio Shack DX-397 - Manual (Page 7)

7
1. Set the DC cigarette lighter adapter’s voltage switch to 4.5V.
2. Line up the 5.5 mm outer diameter/2.1 mm inner diameter bar-
rel plug with the adapter’s socket so it reads –TIP, and insert
the plug into the socket.
3. Insert the adapter’s barrel plug into the receiver’s DC IN 4.5 V
jack.
4. Insert the adapter’s plug into the vehicle’s cigarette-lighter
socket.
ADJUSTING THE ANTENNAS
FM/SW — For the best FM and short-
wave reception, pull up the telescoping
antenna’s base, then fully extend the an-
tenna and position it for the best recep-
tion.
MW (AM) — For the best MW reception,
rotate the receiver. The receiver uses a
built-in antenna for this band.
(Illus)
(Illus)
20-227.fm Page 7 Wednesday, August 4, 1999 10:13 AM