Roland VS-2480CD - Manual (Page 10)

2—Preparing Your Computer Software
10 www.RolandUS.com Roland VS-2480 Control Surface Mode Guide
3. In the list of control surfaces, select SI-24, and click Add.
4. Close the Install window.
5. Open Logic’s Setup window.
•
In Mac OS X, select Setup... from Preferences>Control Surfaces>.
• In Mac OS 9, select Setup... from Options>Preferences>Control Surfaces>.
• In Windows, select Setup... from Options>Preferences>Control Surfaces>.
The Setup window opens, showing a picture of the Roland SI-24.
6. Click on the SI-24 in the Setup window.
7. At the left of the Setup window, select the MIDI input and output jacks, or “ports,”
to which the VS-2480CD is connected.
MIDI Output
and Input
settings