Radio Shack 12-256 - Manual (Page 7)

6
1. Turn VOLUME counterclockwise until it clicks to turn on the
power.
2. Hold down WEATHER or CLOCK while inserting the barrel plug
into the DC 6V jack. The power indicator flashes briefly. When
it lights steadily, release WEATHER or CLOCK .
Note: The time announcement sounds when you press
CLOCK . This function works whether the weather broadcast
and VOLUME are on or off.
3. Use a straightened paper clip to press SET or SCROLL to
sound the alert tone. Press SET or SCROLL again to stop it.
SETTING THE CLOCK
If the radio receives an alert signal while you are setting the clock,
the radio exits the clock setup mode without updating the time.
Setting the Hour
1. With VOLUME on or off, connect the radio to power and hold
down SET with a straightened paper clip for 2 seconds to
enter clock setup mode.
2. Using a straightened paper clip, hold down SCROLL to auto-
matically advance the hour. The radio announces each hour.
3. When you hear the correct hour, release SCROLL and press
SET once to confirm the entry and enter the minute setting
mode.