Roksan Audio Caspian User Manual
Page 9

1 Power Button
Toggles the DVD into and out of Standby
Standby Indicator will glow Red
2 Eject Button
Opens and Closes the disc loading tray
Display will indicate OPEN/CLOSE
3 Setup Button
OSD displays the Setup Menu
See Setup
4 Title/Menu Button
Displays DVD Disc Menu
5 Brief Button
Briefly plays and Displays directly accessible Titles
PBC OFF
6 PBC Button
Toggles broadcast On and Off
7 Zoom Button
Displays picture in normal to x2, x4, normal, x2, x4 ….. zoom
8 Slow Button
Displays picture in normal, SF x2, x4 ,x8 SR x2, x4, x8, normal
9 Goto Button
During Play allows selection of desired Title or Chapter
Use < or > to select
TiTle or Chapter
Entre No. using Numercal keys
10 Scan Button
Scans Reverse x2, x4, x8, x16, x32, normal
Fast reverse on CDs
11 Scan Button
Scans Forward x2, x4, x8, x16, x32, normal
Fast forward on CDs
12 Skip Button
Skips Back one Title at a time
Skips back a track on CDs
13 Up Button
Moves Cursor Up
14 Skip Button
Skips Forward one Title at a time
Skips forward a track on CDs
15 Move Right Button
Moves Cursor Right
16 Move Left Button
Moves Cursor Left
17 Pause/Step Button
Pauses picture and evry time moves it forward a frame
Press Play/SEL. to resume
18 Stop Button
Stops play
Press Play/SEL. to resume on DVDs
19 Move Down Button
Moves Cursor Down
20 Display Button
Displays Time elapsed, remaining on Title and Chapter
Track and Disc for CDs
21 Audio Button
Selects Audio outputs available on DVD disc
22 Subtitle Button
Selects Subtiles available on DVD disc
23 Angle Button
Selects camera angles available on DVD disc
24 A-B Repeat Button
Selects points A and B on disc for repeat to commence and end
Press during play at the point where repeat is to commence
Press again at the point where repeat is to be concluded
25 1/ALL Repeat Button
Selects Chapter or Title to be repeated
Press during play
Repeat of chapter being played
Repeat of Title beaing played
Cancel repeat mode
26 Clear Button
Erases in sequence from last programmed Track
Every press erases one programmed track
27 Memory Button
Programmes Tracks to be played in the order desired
Press Stop
Press Memory
Use numerical keys to enter Numbers
Press Play/SEL.
28 Numerical Buttons
Selects the desired numbers
001 for 1, 002 for 2 …etc.
29 Volume Button
Adjusts L&R Audio Output Volume
Not applicable to Digital Output
30 TV/System Button
Selects between Multi, NTSC or PAL Video Output systems
During Play
31 Mute
Mutes and unmutes Audio Output
In all modes
Roksan Audio ltd
Caspian DVD Player User Manual
CLASSIFICATION: General Use
Version 2.01
All specifications are liable to change without notice. E&OE
Page 9 of 22
ENGLISH
Direct Access via Numerical Buttons:
You can access your desired track on a CD directly by entering the desired track number (001 for 1, 002
for 2 … etc.) The DVD player would automatically go to the selected track on the CD and begin to play.
If you do not enter the preceding zeros, then press PLAY/SEL. or wait after you have entered the track
number, and your selected track starts to play after a few seconds.
When playing CDs, the DVD front panel display will indicate the track number for a couple of seconds and
then the display will revert to showing elapsed time. (The OSD will indicate your selections such as Track
Number, Play, Pause, Scan etc)
On DVDs, you can access your desired Title/Chapter, by first selecting ‘GOTO’, then select between Title
or Chapter and then enter the desired number as outlined above (01 for 1, 02 for 2 … etc).