Roberts Radio CR9926 - Manual (Page 8)

Listening to the Radio
1. Switch on your CD clock radio by pressing the On/Off button.
2. Set the Function switch to the Radio position. The Led dial pointer
will light up.
3. Set the Waveband switch to the required waveband.
4. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
5. Adjust volume using the Volume Up and Down buttons.
6. The Wire aerial located on the rear of your CD clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
7. For MW and LW reception there is a built in ferrite aerial. Rotate your
CD clock radio to the position giving best reception.
8. The radio can be switched off by pressing the On/Off button.
7