RoyalTek REB-3300 - Manual (Page 3)

REB-3300 Operational Manual
RoyalTek GPS Module: REB-3300 Operational Manual
Introduction
RoyalTek REB-3300 low power and small form factor board is the newest generation of
RoyalTek GPS Receiver. The GPS receiver is powered by SiRFStarIIe/LP technology with
XTrac 2.0 firmware and RoyalTek proprietary navigation algorithm that providing you more
stable navigation data. The smallest form factor and miniature design is the best choice to be
embedded in a portable device like PDA, personal position and navigation like personal locator,
speed camera detector and vehicle locator. The excellent sensitivity of REB-3300 gets the
great performance when going though the urban canyon and foliage.
Product Features
12 parallel channels
Operable from 3.3V/65mA continuous mode.
SMT type with stamp holes
Pin reserved for Backup battery and RF connector
TCXO design
7 I/O lines(GPIO) available to connect
0.1 second reacquisition time
Small form factor.
NMEA-0183 compliant protocol/custom protocol.
Enhanced algorithm for navigation stability.
Excellent sensitive for urban canyon and foliage environments.
SBAS (WAAS, EGNOS and MSAS) support
Auto recovery while RTC crashes
Trickle power supported
ARM 7 CPU core accessible
4/8/16Mbits Flash Memory
Optional
SiRFStarII normal version firmware
SiRFStarII enhance(ES) version firmware
XTrac 2.0 high sensitivity(HS) version firmware
Product applications
Automotive navigation
3