Ryobi RE180PL1 - Manual (Page 6)

6
SPECIFICATIONS
UNPACKING
APPLICATIONS
Use your router only for the purposes listed below:
■ Routing grooves, shaping edges, freehand designs, etc. in wood.
■ Chamfering, rabbeting, dadoing, and dovetailing in wood.
■ Routing edges on laminates.
Plunge Depth 0 - 2 in. (0 - 5.08 cm)
Collet 1/2 in. (12.7 mm)
Adaptor 1/4 in. (6.35 mm)
Peak Horsepower 2
Input 120 Volts, 60 Hz, AC Only, 10.0 Amperes
No Load Speed 15,000 - 23,000 RPM
Power Cord 10 ft. (3 m)
Net Weight 8.5 lbs. (3.86 kg.)
INSTRUCTIONS
Your router has been shipped completely assembled.
■ Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing
list are included.
■ Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Plunge Router
Collet
Adaptor
15/16 in. (23.8 mm) Wrench
5/16-18 UNC-2A Flathead Screws (2)
Operator’s Manual
NOTE: The screws and the optional depth control knob
must be used when mounting your router to a router
table. They are the only screws that will secure your
router to a router table properly.
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.