Rockford Fosgate 100X2 - Manual (Page 5)

2
PUNCH 40DSM
PUNCH 60DSM
PUNCH 100DSM
PUNCH 200DSM
Dimensions
9-5/8" (24.4cm) W
9-5/8" (24.4cm) W
9-5/8" (24.4cm) W
9-5/8" (24.4cm) W
9-5/8" (24.4cm) L
10-5/8" (27.0cm) L
11-5/8" (29.5cm) L
12-5/8" (32.0cm) L
2-5/8" ( 6.6cm) H
2-5/8" ( 6.6cm) H
2-5/8" ( 6.6cm) H
2-5/8" ( 6.6cm) H
Bandwidth
15Hz to 100kHz
±
3dB
Damping Factor @ 4
Ω
At output connector - Over 200
Frequency Response
20Hz to 20kHz
±
1.0dB / 10Hz to 100kHz
±
3dB
Slew Factor
Over 5
IM Distortion (IHF)
Less than 0.05%
Input Gain
Variable from 40dB to 14dB (250mV - 1 Volt)
25dB
26.8dB
29dB
32dB
The above figures are factory preset and are correct for 500 m
V rated source units.
Protection
Internal analog-computer output protection circuitry limits power in case of overload. Thermal switch shuts down the amplifier in case of overheating.
Battery Fusing Rates
20 Amps
30 Amps
40 Amps
50 Amps
(External to Amplifier) Fuse Type
ATC
ATC
ATC
AGU
Equalization
Bass: +18dB Maximum at 45Hz
Treble: +12dB Maximum at 20kHz
Input Impedance
≤
20k ohms
Specifications subject to change without notice.