Rockford Fosgate 100X2 - Manual (Page 23)

TROUBLESHOOTING
Problem
Connecting end caps when using large gauge wire.
Solution
Cut the wire casing on the diagonal as shown in the
following diagram. Insert the wire into the connector. Twist
the wire around so that the long end of the insulation faces
up. Bend the wire prior to tightening in place.
20
Note: For easier assembly, only 5/8" (1.89cm) of wire
should be bared.
> <
5/8"
INSULATION
STRIP WIRE
>
>
AMP
>