Radio Shack PRO-2051 - Manual (Page 45)

45
Beyond the Basics
using signal stalker
To turn on Signal Stalker, turn SQL fully clockwise, then
press FUNC +
once except in WX search, band select, or
program mode. appears. Every 2 seconds, the scanner
searches for frequencies in the range you specifi ed in
“Setting the Signal Stalker Options”.
When the scanner fi nds a frequency, it sounds the alert you
specifi ed in “Setting the Signal Stalker Options”, and Found
fl ashes. Press any key to confi rm the displayed frequency.
Press HOLD/RESUME to resume scanning.
To turn on Signal Stalker and turn off normal scanning, press
FUNC +
twice. and - - - - - - fl ash.
To turn off Signal Stalker and turn on normal scanning, press
FUNC +
three times. disappears.