Reliable MSK-1541S - Manual (Page 3)

1 1
1. Brief introduction
This machine adpots specific mechanism and
timing feed, which can ensure smooth feeding, low
noise, and beautiful stitches in apperance. It is
constructed with slide link thread take-up, horizontal
large rotating hook crochet,synchronic driving. This
machien is widely used in the factory of suitcase,
sofa, tarpaulins, tents, bag, etc.
Heavy duty
2500 spm
9mm
36mm
DP*17 (Nm125-Nm180) standard Nm160 (23#)
Auto-lubrication
Horizontal rotating hook
9mm by hand, 16mm by knee
370W
2. Mian specifications
Application
Max.sewing speed
Max.stitch length
Needle bar stroke
Needle
Lubrication
Rotating hook
Height of presser foot lift
Motor
3. Installation (Fig.1)
1.Installation of the table connecting hook bracket
and rubber cushion.
Fix the connecting hook bracket 1 and the rubber
cushion 2 on the table by screw 3.
2.Installing the oil reservoir.
Set the oil reservoir 4 onto the table by six screws
as shown in the Fig.
3.Install the knee control connector 5, knee control
lift crank 9 and bent bar 7 according to the direction
of the knee control lift bar shaft 8.
4.Adjust the direction of part 6,10, 11 by set screw.
Table
In one line