RuggedCom RuggedServer RS401 - Manual (Page 8)

www.RuggedCom.com 8 RuggedSwitch™ RS401
RuggedServer™ RS401
4-Port Serial Device Server with Integrated 4-Port Managed Ethernet Switch
RuggedCom Inc.
300 Applewood Crescent, Concord, ON, Canada, L4K 5C7
Tel: +1 (905) 856-5288 Fax: +1 (905) 856-1995
Toll Free: +1 (888) 264-0006
Technical Support Center: +1 (866) 922-7975 or +1 (954) 922-7975
© 2009 RuggedCom Inc.
RuggedServer is a trademark of RuggedCom Inc.
Ethernet is a trademark of the Xerox Corporation.
Patent Pending
All specifications in this document are subject to change without notice.
Rev 1-M
For additional information on our products and
services, please visit our web site at: www.ruggedcom.com
RS401 -__ - __ - _____ - __ - __
PS M E1E2 SP MP
PS: Power Supply
„ 24 = 24VDC (9-36 VDC)
„ 48 = 48VDC (36-59 VDC)
„ HI = 85-264VAC or 88-300VDC
M: mounting options
N = no Mounting Hardware „
D = Front panel mount with DIN screw points „
P = Side panel mount with DIN screw points „
E1, E2: Ethernet Ports 1 & 2 Options (1)
„ TX = 10/100BaseTX RJ45
„ FL = 10FL Multimode ST, 820nm, 2km
„ MJ = 100FX Multimode MTRJ
„ MC = 100FX Multimode SC
„ MT = 100FX Multimode ST
„ T2 = 100FX Singlemode ST, Standard 20km
„ L2 = 100FX Singlemode LC, Standard 20km
„ L5 = 100FX Singlemode LC, Intermediate Reach 50km
„ L9 = 100FX Singlemode LC, Long Reach 90km
„ C2 = 100FX Singlemode SC, Standard 20km
„ C5 = 100FX Singlemode SC, Intermediate Reach 50km
„ C9 = 100FX Singlemode SC, Long Reach 90km
SP Serial Port Options
„ 2 = 4 x RS232 via DB9
„ 4 = 4 x RS485 via 3 POS screw terminals.
„ 3D = 4 x RS232/RS422/RS485 via DB9
„ 3R = 4 x RS232/RS422/RS485 via RJ45
MP Modem Port Options
„ Blank = No Modem
„ M = V.90 (56Kbps) Modem
ORDER CODE EXAMPLES
RS401-24-D-TXTX-2
RS401-48-P-FLFL-4
RS401-HI-P-MCC2-2
RS401-HI-N-L2L5-4-M
1. Ports 1 & 2 must have the same type of connector
ie. RJ45, MTRJ, ST, SC, LC
Order Codes