RCA L32WD12 - Manual (Page 38)

38 Chapter 4
Other Information
Mounting Your TV to the Wall
Caution: The wall mount must bear a minimum of fi ve times
the TV’s net weight without causing damage.
To mount your TV to the wall you need to purchase a VESA wall
mount. For model L26WD12, purchase a VESA MIS-F, 400, 200, 4
(400, 200 means the mounting measurements are 400mm horizontally
and 200mm vertically; 4 means M4 type screws need to be used). For
models L32WD12 and L37WD12, purchase a VESA MIS-F, 400, 200, 6
(400, 200 means the mounting measurements are 400mm horizontally
and 200mm vertically; 6 means M6 type screws need to be used).
1. You need to remove the base fi rst before attaching the wall mount.
A. Place the TV facedown on a surface that is soft, yet strong
enough to hold the TV.
B. Use a screwdriver to remove the screws from the four holes on
each side of the TV’s base as the arrows indicate on the base.
2. Make sure all cables are already connected to the TV.
3. Follow the directions included with the wall mount to mount the
TV to the wall.
Remove the screws from the four holes on
each side of the TV’s base.
1665105B.indb 38 1665105B.indb 38 2/17/06 6:31:59 PM 2/17/06 6:31:59 PM