RCA F19425 - Manual (Page 17)

Chapter 1 15
Connections & Setup
+
-
TIMER ON • OFF EJECT
SPEED CAPTION
CH +
SKIP-SEARCH P P MUTE
CH -
SLEEP GO BACK
CALL PROGRAM
AU
TRA SLOW
CANCEL MENU
1 2 3
4 5 6
7 8 9
0
INPUT TV/VC // R
PLA A
RECORD PAUSE ST
VO
L
VO
L
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers and your V-CHIP password
directly through the remote control.
If you are receiving UHF/VHF channels, select a channel by pressing two
number buttons. For example, to select channel 2, press 0, then 2.
If you are receiving cable channels, select channels 1-12 by pressing three
number buttons. For example, to select channel 9 press 0, then 0 and then 9. To
select channels 13-99, press the two number buttons in order. To select channels
100-125, press the three number buttons in order.
Arrow + and - buttons (up and down) Press the arrow buttons to move
through the on-screen menu system.
AUTO TRACK Allows automatic reduction of streaks which might appear
during regular or slow-motion playback.
CALL Displays TV/VCR’s current status. Displays the time counter when a tape
is inserted. Press again to remove call.
CANCEL Clears settings in menu screens that require you to enter information
(for example, entering information for a timer recording).
CAPTION Switches between Caption, Text and TV modes for Closed-
Captioned programs.
CH (up and down) buttons Scan up or down through stored channels. Press
once to change the channel up or down; press and hold to continue changing
channels.
EJECT Ejects a tape.
ENTER When a menu is on the screen, press ENTER to select the item that
is highlighted.
FORWARD Fast forwards the tape when the TV/VCR is stopped. Also searches
the picture in forward motion during playback.
GO BACK Switches between the last two channels selected.
INPUT Switches the program for viewing between the VCR and external input
sources.
L.E.D. (light-emitting diode) The little light on the remote that lights when you
press a valid button on the remote.
MENU Displays the TV/VCR’s MENU.
MUTE Lowers the TV/VCR volume to its minimum level. Press again to restore
volume.
ON•OFF Turns the TV/VCR on and off.
PAUSE Pauses the tape during playback. Also pauses the tape during
recording to prevent recording of unwanted scenes.
L.E.D.