RCA F19425 - Manual (Page 15)

Chapter 1 13
Connections & Setup
Adding or Removing Channels
You might want to add or remove channels if some of them are not active, have
weak signals, or you don’t want them in your channel memory. A channel that
has been removed can still be selected by pressing the remote control’s number
buttons.
1. Press MENU on the remote (the MENU appears).
2. Press the down arrow button to select CH SET-UP, then press ENTER.
3. Press the down arrow button to select ADD/DELETE, then press ENTER.
4. Use the number buttons to enter the channel you want to add or delete.
Press ENTER to add or delete the channel. The screen shows whether the
TV adds or deletes the channel.
5. Press MENU until the MENU screen disappears.
CH 003 ADD
〈
0–9/+/–/ENTER/MENU
〉