RCA DRC300i - Manual (Page 2)

A. ANALOGUE CONNECTION
Using an audio/video cable, connect the left/
right AUDIO OUT jack on your unit to the
AUDIO IN jack on your other source. B. DIGITAL CONNECTION
Using a coaxial digital audio cable (not
included), connect the DIGITAL AUDIO OUT
jack on your unit to the DIGITAL AUDIO IN
jack on your other source.
1. OPEN/CLOSE Button
Press to open or close the disc tray.
2. STANDBY/ON Button
Press to turn on the unit or put it in
standby mode
3. AUDIO Button
Press to select one of the audio sound
tracks programmed on a DVD or to select
the audio output mode on an audio CD.
4. ANGLE Button
Press to switch the camera angle of the
video presentation when scenes with
multiple camera angles are recorded on
a DVD.
5. MEMORY Button
Press to create programs.
Press to rotate JPG files in iPod mode.
6. DISPLAY Button
Press to change disc status information
displayed on the TV screen.
7. SETUP Button
Press to open and close the SETUP
menu screen
8. CURSOR ( , , , ) Button
Press to highlight selections on a menu
screen and adjust certain settings.
OK Button
Press to confirm selections on a menu
screen.
9. CLEAR Button
Clear input selections and cancel certain
playback functions.
Press to select iPod’s “Remote UI mode”
or “Extended Interface mode”.
10. PLAY Button
Press to start playback.
11. STOP Button
Press to stop playback.
12. SEARCH Button
Fast reverse playback.
13. REV Button
Press to move backwards through titles,
chapters or tracks on a disc.
14. Number (0-9) Buttons
15. A-B REPEAT Button
Press to perform point-to-point repeat
playback on a DVD or CD.
16. SOURCE Button
Selects input sources.
17. SUBTITLE Button
Press to select one of the subtitle
languages programmed on a DVD.
18. ZOOM Button
Zoom in an image.
19. RETURN Button
Press to return to the normal operation
after using the SETUP button.
Press to return to the previous menu in
iPod mode.
20. TITLE Button
Press to open the title menu screen.
21. MENU Button
Press to open and close the DVD’s
menu.
22. HDMI Button
Press to change the video output
signals.
23. PAUSE Button
Press to pause playback, frame
advance.
24. SEARCH Button
Fast forward playback.
25. NEXT Button
Press to move forward through titles,
chapters or tracks on a disc.
26. SLOW Button
Press to perform slow forward playback
of DVDs.
27. GOTO Button
Press to skip directly to a specific location
on a DVD.
28. DISC REPEAT Button
Press to repeat chapter or title of a DVD.
Press to repeat single track or whole CD.
Press to repeat songs/albums from your
iPod.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the provided
plug does not fit into your AC power outlet,
consult an electrician for replacement of
the obsolete outlet.
10.Protect the AC power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13.Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14.Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the AC power cord or plug is
damaged, liquid has spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY
INSTRUCTIONS
DISC FoRmATS
Region Management Information
This unit is designed and manufactured
to respond to the Region Management
Information that is encoded on DVDs. If the
region number printed on the DVD does not
correspond to the region number of this unit, it
cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that is Not
Available
When the
appears on the screen, it
indicates that the function or operation
attempted is not available at that time. This
occurs because the DVD manufacturer
determines the specific functions of DVDs.
Certain functions may not be available on some
DVDs. Be sure to read the documentation
provided with the DVD.
Icons Used on DVDs
Sample lcons
Note: When playing back a CD-G (Graphics)
or CD EXTRA disc, the audio portion will be
played, but the graphic images will not be
shown.
Title, Chapter and Tracks
• DVDs are divided into
“titles” and
“chapters”. If the disc has more than
one movie on it, each movie would be a
separate
“title”. “Chapters” are sections
of titles.
• Audio CDs are divided into “tracks”. A
“track” is usually one song on an Audio
CD.
Note:
Numbers identify each title, chapter, and track on
a disc. Most discs have these numbers recorded
on them, but some do not.
The unit can playback:
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
SoUND SYSTEm
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby
Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable
for two-channel listening. An additional Dolby Digital decoder is required for reproduction of the
discrete multi-channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
‘Dolby’ and the double-D symbol
are trademarks of Dolby Laboratories.
ACCESSoRIES
Please check and identify the supplied accessories.
• To order accessories visit web site http://www.1800customersupport.com/RCA
Remote Control .......................................................................................................... x 1
2xAAA batteries .......................................................................................................... x 1
AV cable ...................................................................................................................... x 1
CoNTRoL REFERENCE GUIDE SETUP AND CoNNECTIoNS
Remote Control Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in very bright light, the
infrared REMOTE CONTROL SENSOR
may not work properly.
• The recommended effective distance
for remote operation is about 16 feet (5
meters).
Battery Replacement
When the batteries become weak, the
operating distance of the remote control
will be greatly reduced and you will need to
replace the batteries.
Notes:
• If the remote control is not going to be used
for a long time, remove the batteries to
avoid damage caused by battery leakage
corrosion.
• When discarding batteries, environmental
problems must be considered and local
rules or laws governing the disposal of
these batteries must be strictly followed.
WARNING:
• Do not dispose of the battery in fire or it
may explode or leak.
• Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
REmoTE CoNTRoL
DVDs
[8cm/12cm disc] Audio CDs
[8cm/12cm disc]
Compatible
Unit
1
16
17
19
21
22
23
25
24
20
18
26
27
28
2
4
6
7
9
11
13 12
10
8
5
3
14
15
1 3 2 4 5 9
6 7 8
To wall outlet
10
11
12
13
14 15 16
1. STANDBY/ON Button
Turn the unit on or put it in standby
mode.
2. Power Indicator
Indicator On: The unit is in standby
mode.
Indicator Off: The unit is turned on.
3. DISC TRAY
Opens or closes the tray by pressing the
OPEN/CLOSE button.
4. REMOTE SENSOR
Receives the remote control unit signals.
5. DISPLAY LENS
Display units information.
6. OPEN/CLOSE Button
Opens or closes the tray.
7. PLAY Button
Starts or resumes playback of a disc.
8. STOP Button
Stop playing a disc.
9. iPod dock door
Push to open the iPod dock.
10. VIDEO OUT jack
11. OPTICAL OUT jack
12. HDMI OUT jack
13. S-VIDEO jack 14. LEFT/RIGHT AUDIO OUT jacks
15. COAXIAL DIGITAL AUDIO OUT jack
16. COMPONENT VIDEO OUT jacks
(Y, P
B
& P
R
)
SYMPTOM CAUSE (AND REMEDY)
• Ensure the AC power cord is connected.
• The unit is not turned on.
• Remove any obstacles between the remote and the unit
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new one.
• Make sure that you select ON mode.
• The system is in pause mode. Press the
PLAY button to return to
normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the PLAY
button to return to normal play mode.
• Make sure the AUDIO output is correct.
• Make sure the audio cable is connected securely.
• The region number of the disc doesn’t match the region number of this
unit.
• The TV is not set to receive DVD signal output.
• The video/HDMI cable is not connected securely.
• The TV is not turned on.
• Clean the disc.
• Check connection between HDMI TV and the unit.
• Replace the HDMI cable with a better one. Bad HDMI cable can cause
data lost.
• Press HDMI key on remote handset several times to toggle among
different HD OUTPUT.
• Check the connections.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened
with alcohol.
• Clean the disc.
• There is no disc inside. (“No Disc” appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change
in temperature. Wait about an hour for it to clear and try again.
• Reset the unit, press the STANDBY/ON button to turn off the unit, wait for
a few seconds, then restart the unit.
No power.
The remote
control does not
function.
No sound or only
a very low-level
sound is heard.
No picture or
abnormal color.
No output on your
HDMI TV.
Severe hum or
noise is heard.
The disc does not
play.
The DVD door
cannot open.
TRoUbLESHooTING GUIDE
CONNECTING TO A TV
The unit can be connected to your TV in several different ways, depending on the design of your TV.
Note: Use only one of the below listed connection method for connecting to your TV.
B. COMPONENT VIDEO OUT (DVD)
Some TVs or monitors are equipped with
component video inputs.
Use an audio cable (not supplied), connect
the left/right AUDIO OUT jacks on your unit to
the left/right AUDIO IN jacks on your TV.
Using a component video cable (not supplied),
connect the Y VIDEO OUT jack (green plug)
on your unit to the Y VIDEO IN jack on your
TV, the P
B VIDEO OUT jack (blue plug) on
your unit to the P B VIDEO IN jack on your TV
and the P R VIDEO OUT jack (red plug) on
your unit to the P
R
VIDEO IN jack on your TV
to view the highest quality picture playback.
SAFETY PRECAUTIoNS
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
user manual.
CAUTION
I NVISIbLE LASER RADIATIoN WHEN
oPEN AND INTERLoCKS DEFEATED.
AVoID EXPoSURE To bEAm.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
On Placement
• Do not use the unit in places that are
extremely hot, cold, dusty, or humid.
• The ventilation should not be impeded
by covering the ventilation openings with
items such as newspaper, table-cloths,
curtains, etc.
On Safety
• When connecting or disconnecting the AC
power cord, grip the plug and not the cord
itself. Pulling the cord may damage it and
create a hazard.
• When you are not going to use the unit for
a long period of time, disconnect the AC
power cord.
• No naked flame sources such as lighted
candles should be placed on the AC power
cord and the unit.
• Leave a minimum of 10 cm around the
apparatus for ventilation.
• Attention should be drawn to the
environmental aspects of battery disposal.
• Use of apparatus in moderate climates.
On Condensation
• When left in a heated room where it is warm
and damp, water droplets or condensation
may form inside the unit. When there is
condensation inside the unit, the unit may
not function normally. Let the unit stand for
1 to 2 hours before turning the power on,
or gradually heat the room and let the unit
dry before use.
Rating Plate Location
• The rating plate is located on the rear of unit.
FCC Statements
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Shielded cables must be used with this unit to
ensure compliance with the Class FCC limits.
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
• Should any trouble occur, disconnect the AC power cord and refer servicing
to a qualified technician.
• Main plug is used as the disconnect device, it shall remain readily operable
and should not be obstructed during intended use. To be completely
disconnected the apparatus from supply mains, the main plug of the
apparatus shall be disconnected from the mains socket outlet completely.
WARNING
Notes on Copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, or rent
copyrighted material without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549;
6,381,747; 7,050,698; 6,516,132; and 5,583,936
licensed for limited viewing uses only. This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This product
contains a low power
laser device.
User manual
DRC300i
Notes on Unauthorized Discs
You may not be able to play some DVDs
on this unit, particularly if they were
purchased from outside your geographic
area or made for business purposes.
mAINTENANCE
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out
during playback. Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may
cause malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth
that has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe
with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use
compressed air to remove dust.
Important Note
Before transporting the unit, remove the disc from the disc compartment.
A. RCA AUDIO/VIDEO JACKS
1. Use the Audio/Video cable (supplied).
Connect the VIDEO OUT and left/right
AUDIO OUT jacks on the unit to the
VIDEO IN and left/right AUDIO IN jacks
on your TV.
2. Use the S-video cable (not supplied).
If the TV has a S Video input, connect
the unit with an S video cable. When
using an S-Video cable, do not connect
the yellow video cable and component
video cables (Y/P
B
/P
R
).
For TVs that support it, HDMI can provide
the best quality audio and video output
(depending on media source), and so is
the preferred connection type. The HDMI
cable incorporates both audio and video
signals, so you will have just one cable
running from the unit to your TV.
Using the HDMI cable (not included),
connect the HDMI OUT jack on your unit
to the HDMI IN jack on your TV or HDMI-
compatible display.
• When using the HDMI cable, do not
connect to other analog video outputs.
• Set an output signal from the HDMI
terminal of the DVD player in accordance
with your TV’s input signal.
• When using HDMI cable, set the HDMI
Audio to PCM.
• Press the HDMI button on the remote
control to change output signals as
below:
480p (progressive)
720p (progressive)
1080I (interlace)
1080p (progressive)
Notes:
• Refer to your owner’s manual to the
connected TV as well.
• When you connect the DVD player to
your TV, be sure to turn off the power
and unplug both units from the wall
outlet before making any connections.
• If you have a HDMI (with HDCP)
equipped monitor or display, you can
connect it to this player using a HDMI
cable.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
C. CONNECTING TO A DISPLAY (Using a HDMI cable)
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
Notes:
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience
the interference if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.
TV
DRC300i
red whit
e
yellow
red
whit
e
yellow
AV cable (included)
TV
DRC300i
red
red
whit
e
whit
e
Audio cable
(red and white)
S-video
cable
green
blu
e
red
TV
DRC300i
red
red
whit
e
whit
e
VIDEO IN AUDIO IN
Audio cable
(red and white)
green
blu
e red
Component
video cable
(green/blue/red)
DRC300i
Amplifier of
stereo system, etc.
AUDIO IN
ANALOGUE CONNECTION
red
whit
e
red
whit
e
Audio cable
(red and white)
DRC300i
Audio equipment with
digital audio input jack
DIGITAL
AUDIO IN
DIGITAL CONNECTION
Coaxial Digital
Audio cable
CAUTION
RISK oF ELECTRIC SHoCK
Do NoT oPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: THE APPARATUS SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
APPARATUS.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES
OTHER THAN THOSE
SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF BATTERY
IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
CAUTION: TO REDUCE THE RISK OF FIRE,
DO NOT PLACE ANY HEATING OR COOKING
APPARATUS BENEATH THIS UNIT.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF POWER OUTLET, THEN FULLY INSERT.
The symbol for Class
II (Double Insulation)
Caution Marking and rating plate was located
at rear enclosure of the apparatus.
Portable Cart Warning
2. Insert two AAA size batteries.
1. Open the battery door.
To Change Remote Batteries
1 2 3 4 5
DRC300i IB ENG REV1.indd 2 7/14/2008 9:51:26 AM