Royal Sovereign ARP-3010 - Manual (Page 8)

operation
control panel
8
power control
The power control turns the unit on and off. When you press the control, the unit begins to operate.
warning light
Condensed water may accumulate in the unit. If the internal tank fills, the Warning Light will shine and the unit will not operate until the unit has been drained.
Mode control
The Mode Control has 3 settings:
The settings are adjusted with the Mode Control button. The green light will indicate which setting is currently being used.
Fan Mode
When the fan mode is selected, the indicator light will shine green. The Air is circulated throughout the room with no cooling.
dehumidify / dry Mode
Press the Mode button to select dehumidify mode. When the dehumidify mode is on, the temperature buttons and fan speed buttons do not function and the fan will operate on
medium speed. The dehumidify indicator light will illuminate and stay solid while unit is dehumidifying. When the humidity in the room is 50% or lower, the compressor will not run,
the unit will not dehumidify, and the Dehumidify light will blink.
Warning Light Power control
Mode control Fan speed control
Display Timer/ Temperature set control
Cool Dehumidify
Fan