Royal Sovereign ARP-3010 - Manual (Page 10)

timer program
There are 2 different timer programs. You can set the number of hours before the
air conditioner automatically turns OFF or you can set the number of hours that will
elapse before the unit turns ON.
When the air conditioner is turned off, you can choose to turn it on in one hour
intervals.
1. Press the
button on the remote to turn on the timer function.
2. Press the or button on the remote to set the desired hour.
3. The unit will turn on when the set time elapses.
When the air conditioner is turned on, you can choose to turn it off in one hour
intervals.
1. Press the
button on the remote to turn on the timer function.
2. Press the or button on the remote to set the desired hour.
3. The unit will turn off when the set time elapses.
oscillating Mode
Press∙the∙(SWING)∙button∙on∙the∙remote∙control∙to∙oscillate∙air∙movement∙from∙left∙
to right and right to left.
dehumidification Mode
Press the Mode button to select dehumidify mode. When the dehumidify mode is on,
the temperature buttons and fan speed buttons do not function and the fan will
operate on medium speed. The dehumidify indicator light will illuminate and stay solid
while unit is dehumidifying. When the humidity in the room is 50% or lower, the
compressor will not run, the unit will not dehumidify, and the Dehumidify light will blink.
Fahrenheit/ celsius selector
Press the Fahrenheit/ Celsius selector button to display temperature reading you
would like to use.
10
remote control
The functions of the remote work the same as your air conditioner’s touch controls.
LCD Screen
Timer / Temperature
control set button
Power On/Off
Mode∙button∙(cool,∙fan,∙or∙dehumidify)
A/C∙Fan∙speed∙button∙(high,∙medium,∙or∙low)
Oscillation∙(Swing)button
Fahrenheit/ Celsius selector
Timer / Temperature mode selection button